High speed automatic tablet press machine model GZPK720

GZPK 720 -Rotary Tablet Pill Press Machine with full automatic function

Product Description

GZPS-720 Full-automatic Double discharge High-speed Tablet Press Machine

Technical Data:

Working Environment:

The working environment conforms to relevant requirements of GMP specification.

Material Pressing Requirement

Granule Requirement

· Granule size scope: 14-60 meshes, good compressibility and mobility;

· Synthetic medicine starch tablet: the granules should be uniform and moisture should be less than 3%;

· the proportion of fine powder (above 60 meshes) in the granules should not exceed one third;

· Traditional Chinese medicine granules: pure extract, semi-extract and raw powder granules should not be moist and should have certain mobility.

Dry Powder is applicable on this GZPK720 series automatic high speed tablet machine

· This high speed tablet press machine is suitable for pressing the powder directly. The pressed powder should have certain compressibility and fluidity.

Tablet Form Requirement

Can suppress the ordinary round tablet, large tablet, special-shaped tablet, single-double-sided lettering tablets.

Power supply Requirement

380V, 50Hz, three-phase five-wire system, no mutual interference between N line and PE line.

Technical Parameters of GZPK Dual-discharge High-speed Tablet Press (GZPK-51/65/83)

Cope of Application:
New type rotary tablet press gives you better quality and price, automatic tablet press for pressing granular raw materials into solid tablets
This high speed rotary tablet press machine is a double pressing roller type, continuous automatic tablet press for pressing granular raw materials into tablets. This automatica tablet press machine is mainly used in pharmaceutical industry and also the chemical, food, electronic, plastic and metallurgical industries.

Full Features:
1. The outside part of the high speed rotary tabletting machine is fully-enclosed, and it is made of stainless steel, meeting the GMP requirement.
2. This high speed tablettling machine has transparent windows, so that press condition can be observed clearly and the windows can be opened. Cleaning and maintenance are easier
3. This automatic tablet press machine can press not only round tablets, but also different geometrical
shape tablets, double-layered and annular tablets; the tablets may have the impressed letters on both sides
4. All the controllers and devices are located in one side of the machine, so that it can be easier to operate
5. An overload unit is included in the system to avoid the damage of the punches and apparatus, when overload occurs on this GZPK720 high speed tablet press machine

Lower Pressing Wheel Mechanism

Punch Disk Structure

· Middle die plate on this GZPK720 high speed tablet machine is made of 2Cr13 stainless steel and is processed by laser quenching to make the surface hardness above HRC55, thus having good hardness, wearing  and corrosion resistance.
· Upper and lower punch holder turret are made of QT600 and the surfaces thereof are coated with nickel-phosphorus for rust protection, so they have good wear resistance and lubrication.
· End face run-out of middle punch disk is less than or equal to 0.03mm.

· The permanent magnetic damper is adopted as the lower punch damper, and the lower punch pin is not contacted withg the damper pin to prolong the service life of the punch pin, and ensure the damping consistence of the lower punch pin, and avoid bounce and free drop of the plunger under high-speed rotation, and reduce rotation noise.

· The upper punch disk is surrounded by a shield, and the air inlet fan is installed at the middle of the roof to keep positive pressure for the upper punch disk and ensure difficult dust entry and convenient cleanin.

  Other Features

1. Tablet weight precision of this high speed tablet press machine is  within 3% (the tablet weight precision of the tablet press also depends on a variety of factors, material compressibility, tablet specifications and mold precision, etc.) The tablet weight can be controlled automatically according to the pre-set tolerance.

2. 
   

2. Thickness control accuracy 0.1mm(the thickness accuracy of the tablet press also depends on a variety of factors, the compressibility of materials, the composition of the tablet, the precision of the mold and the quality of the supporting conditions of the machine, etc.)

3, This high-speed tablet press machine's  pressing chamber should be closed, no pollution, easy to disassemble, easy to clean, and with dust absorption, self-locking door function. The working surface of the high-speed tablet press is smooth and clean outside, without scratches or rust. The coating color and luster is consistent, does not bubble, does not fall off. The overall use of oil drawing board, smooth, smooth surface; All non - stainless steel parts are polished and electroplated with part Numbers engraved on the surface. External appearance of a piece of refinement.

4. This automatic high speed tablet making machine adopt symmetrical double-side feeding, double-side tablet pressing and double-side tablet design. Both the main pressure and the pre-pressure can reach 100KN, and both the main pressure and the pre-pressure can be detected. The main pressure wheel and the pre-pressure wheel are adjusted by synchronous motor, the adjustment speed is fast and the precision is high. Can reduce the amount of waste due to adjustment.

5. The device is equipped with material level sensor6. The equipment has online sampling function, which can adjust the sampling frequency and sampling amount.7, tick waste function, good film, waste film, sample classification export. Delay during startup or shutdown.

Factory Show

CNC equipment in our workshop

Assembling Line For Bouillon Cube Wrapping Machines